BasicsConcernsWhen the power fails at a conventional reactor, operators need pumps, electricity and people to keep the core cool. Fukushima Daiichi in 2011 showed what happens when the electricity does not come back. Most SMR designs answer with one idea: build the plant so physics does the work instead.
That idea is passive safety, and it appears in nearly every vendor presentation. The term is also used loosely. This article defines it, walks through how NuScale, GE Vernova Hitachi and Rolls-Royce SMR apply it, and marks where the claim stops.
Two jobs after a trip
A reactor trip has two safety jobs. The first is to stop the chain reaction. Control rods drop into the core under gravity. In water-cooled designs, heating coolant also becomes a weaker moderator, which slows the reaction without any help. Rolls-Royce SMR says that in some faults, elevated coolant temperature fails to provide enough moderation to keep the core critical, a form of inherent shutdown.
The second job is harder. Fission stops within seconds, but the fuel keeps producing decay heat from radioactive decay. That is a few percent of full power at first, falling over days. Without cooling, the fuel overheats. This is the failure that mattered at Fukushima, and it is where passive designs spend most of their effort.
Size helps. Decay heat scales with the power the core was producing, so a smaller core has less heat to shed. That is arithmetic, not a safety system, and it is the reason a 300 MWe reactor is an easier cooling problem than a 1,100 MWe one.
What passive means, and what it does not
The IAEA defines a passive system as one built entirely from passive components, or one that uses active components in a very limited way to start passive operation. The IAEA’s technical document on passive systems and natural circulation sorts them into four categories:
Category A: no moving parts or fluid, such as a containment vessel.
Category B: a moving fluid but no moving mechanical parts, such as natural circulation through a heat exchanger.
Category C: some moving parts, such as check valves or pressurized accumulator tanks.
Category D: passive operation that needs an outside signal to start, such as control rods released to fall under gravity.
The categories matter because a claim of walk-away safety covers very different things depending on which one it rests on. Category B systems run on weak driving forces, usually buoyancy. An IAEA regulators’ forum working group notes that international standards give no clear definition of passive safety and that reliability is harder to demonstrate when those forces are weak.
Before accepting the next vendor claim, ask which category it relies on and what test showed it works.
Three water-cooled designs, three answers
The three leading water-cooled SMRs take different routes:
NuScale Power Module (77 MWe uprated design, NRC-approved in May 2025): the module sits submerged in a large pool. Two independent passive systems handle decay heat removal and emergency core cooling. The pool can absorb decay heat for more than 30 days, after which air cooling is enough indefinitely. The NRC concluded the design needs no safety-related Class 1E power.
GE Vernova Hitachi BWRX-300 (300 MWe): a natural-circulation boiling-water reactor with a three-train isolation condenser system. GE Vernova says the plant cools itself for a week without power or operator action, and indefinitely if water is added to the condenser pools.
Rolls-Royce SMR (470 MWe, 1,358 MWt three-loop PWR): a hybrid. Reactor coolant pumps run the plant at power, but the layout supports natural circulation for decay heat removal. The company lists both active and passive emergency safety systems.
The third entry is the useful one. Passive is not all-or-nothing. Rolls-Royce chose proven pumped PWR technology and added passive layers, while NuScale removed the pumps from the safety case altogether.
The licensing record differs too. The NRC issued the first US BWRX-300 permit to TVA on September 29, as the agency’s announcement states. Rolls-Royce is still in the UK’s Generic Design Assessment, which is expected to conclude by December 2026. Want to know how this fits into the broader market picture? SMRbrief Pro has the answers.
The seven days and 72 hours quoted above are design-basis claims that regulators review. They are not operating records, because no commercial unit of these designs has run yet.
Beyond water: fuel that cannot melt
Some advanced designs move the passive argument into the fuel. Kairos Power pairs TRISO fuel pebbles with molten fluoride salt coolant that runs at low pressure. Kairos claims automatic safe shutdown and passive cooling on loss of power, and says its TRISO particles cannot melt in a reactor. Low pressure also removes the need for a high-pressure containment structure.
Hermes, the demonstration unit, is the first non-water-cooled reactor approved for US construction in more than 50 years. Kairos targets operation in 2027, and Hermes will not produce electricity. That is the honest status. The passive case for salt-cooled pebble reactors is argued from design and component tests. Demonstrators exist to turn the argument into evidence, and the evidence is not in yet.
What regulators credit, and what they have not decided
The NRC’s 2023 emergency preparedness rule, 10 CFR 50.160, lets SMRs and other new technologies use a performance-based approach with a scalable emergency planning zone. Large light-water plants plan for a plume zone of about 10 miles. Harvard’s school of public health stresses that a smaller zone is a conclusion an applicant must demonstrate. It is not a blanket finding that every advanced reactor is safer.
Two newer items deserve dates. A July 16, 2026 proposed rule would extend performance-based emergency preparedness to all reactor types. It is a proposal, not final. The optional Part 53 framework took effect on April 29, 2026. Under it, applicants propose risk metrics and show how the design protects public health. Passive features earn credit only as far as the analysis and testing support them.
That is the right standard, and it is a demanding one. When the next SMR vendor claims its reactor shuts itself down, which of the four categories is it relying on, and what was tested to prove it?



